Results 1 to 10 of 10
Thread: help furnace/ac problem
-
03-29-2009, 01:10 PM #1
Professional Member
- Join Date
- Jul 2008
- Posts
- 25
help furnace/ac problem
hey everyone
im about to go to my cousins house, because he called me and told me about a problem he is having
ive never heard of it before maybe some of you have
His furnace blower will not shut off, and his air conditioner keeps turning on, while his stat is set to heat
any ideas on where to start? maybe its posible that the stat wire was shorted or something from a screw?
thanks
-
03-29-2009, 01:27 PM #2
possibly.....
what do you do for a living?
have you read the site rules?Gotta have the right tool for the job!
Where is all the stuff MADE IN THE USA?
"Thats what we do Troy. Incredible, Invisible, Imbelivable things. We are an Unseen, Unknown, Unvincible fraternity of craftsman.."
-
03-29-2009, 01:37 PM #3
Professional Member
- Join Date
- Jul 2008
- Posts
- 25
im a gas fitter with minimal experience
worked with an hvac company, doing installations only so my experience with service calls isnt very deep
i have read the site rules
im just looking for some information, like maybe it is something that i have never thought of? i dont know, i just thought i would ask for help
but if i dont get any then i understand
thanks
-
03-29-2009, 01:54 PM #4
Professional Member*
- Join Date
- Jun 2007
- Location
- Round Rock
- Posts
- 2,887
It could be a number of things. You're probably not gonna get much help on here. Homeowners can read the posts. My advice is to have him call out somebody or you call somebody from where you work at to fix the problem. If you don't know or are unsure of what you're doing, you could cost your cousin more money than he would have spent in the first place calling somebody qualified out to fix it.
I like DIY'ers. They pay better to fix.
-
03-29-2009, 02:02 PM #5
Professional Member
- Join Date
- Jul 2008
- Posts
- 25
is there any tips at all that i could have? like the most possible thing that i thought of was that the stat wire could have been hit by a screw, because i know he had someone come in and drywall his whole basement during his reno's
is that a possibility?
-
03-29-2009, 02:06 PM #6Gotta have the right tool for the job!
Where is all the stuff MADE IN THE USA?
"Thats what we do Troy. Incredible, Invisible, Imbelivable things. We are an Unseen, Unknown, Unvincible fraternity of craftsman.."
-
03-29-2009, 02:09 PM #7
Professional Member
- Join Date
- Jul 2008
- Posts
- 25
will do
i guess that really was the main question i was asking, whether or not that was a possibility, sorry if i phrased it wrong, i think i kind of wrote it like i wanted you to do the service call
thanks
-
03-29-2009, 02:20 PM #8
-
03-29-2009, 04:24 PM #9
let us know how you make out when you get back!
Gotta have the right tool for the job!
Where is all the stuff MADE IN THE USA?
"Thats what we do Troy. Incredible, Invisible, Imbelivable things. We are an Unseen, Unknown, Unvincible fraternity of craftsman.."
-
03-29-2009, 04:40 PM #10
Maybe, its a dual fuel system.
And its a more series problem.
Have a service tech from your company help you.
Sorry, this is not a DIY site. So we are not allowed to give out DIY advise of this nature.
So answering your question in the open Residential Forums would be posting DIY instruction for DIYers that may read this post later.
If your in the trade, get your post count up to 15, and apply for Pro Membership.
Once accepted, you have access to the pro tech forums. Where you can ask and get answers to technical questions.
Plus, you also have access to the Pro Education Forums.
All of it is free.
Thread closed.



