OUR DEAR FRIEND HAS CANCER FCS

[timebuilder]

well it is mounted on the other side!!!
F&^%%&%&^KKKKKKKKKKK!!!!!!!!!!!!!!!!!!!1

Okay.

When they put it on the other end (assuming that's what you mean by "other side") did they turn it around, or does it still face the same direction?

[supertek65]

if things get any slower i will be working for you art!

Well, I've already offered to take him to The Majestic for smoked tenderloin sandwiches.

I've been trying to get Frank to hook me up with a job working for his comapny in KC. ....

[supertek65]

they are chamfered so they fit up against the rotor!

F*&%$*^**$^CKKKKKKKKKKKKKKKKKKKKKK

Okay.

When they put it on the other end (assuming that's what you mean by "other side") did they turn it around, or does it still face the same direction?

[heavymetaldad]

Well, I've already offered to take him to The Majestic for smoked tenderloin sandwiches.

I've been trying to get Frank to hook me up with a job working for his comapny in KC. ....

well, they do chillers............... the ones down the hall next to the coffee machine................

[supertek65]

i am confused
i thought they were supposed to pull out!!!!!!!!!!!!!!

if they suck IN
they would be fighting eachother????????????

[supertek65]

i do work on fractional hp chillers

well, they do chillers............... the ones down the hall next to the coffee machine................

[timebuilder]

So, you are saying that they took the fan marked as 25a in the doc, which is mounted that same way in the pic you posted, and put it on the other end of the shaft, turned around, so that the same chamfered side of the hub fits up against the armature?

[timebuilder]

i am confused
i thought they were supposed to pull out!!!!!!!!!!!!!!

if they suck IN
they would be fighting eachother????????????

In the pic you posted, that fan will pull whatever is surrounding it in towards the armature, if the shaft end you are showing turns CCW.

Thats the same end with call out number 26 on it in the diagram, right?

[heavymetaldad]

dammit bob

this fan
it is turning CCW
is it pullin out
or
pushin in??

this job is done.
but this is how the cooling fans were when i took it apart

when trane sent it back that fan was on the other side
it is liquid cooled and the fan should pull from the inside
i believe the original fan was on the wrong side, or ofcourse they both were??

this side turns CCW but i think that is a CW blade

i do not know the internals of that machine, what does the fan do? push gas into the stator? or pull it out?

[supertek65]

no the picture i posted is 25B, but does go CCW



now that i got the rotor back

that fan is on the other side going CW

just like you are looking at it but CW

In the pic you posted, that fan will pull whatever is surrounding it in towards the armature, if the shaft end you are showing turns CCW.

Thats the same end with call out number 26 on it in the diagram, right?

[supertek65]

i understand that it should pull from those motor cooling flanges that you see in pdf and pull out across the stator

i do not know the internals of that machine, what does the fan do? push gas into the stator? or pull it out?

[supertek65]

dr houston!
am i fu^*%$^*$ED??????

In the pic you posted, that fan will pull whatever is surrounding it in towards the armature, if the shaft end you are showing turns CCW.

Thats the same end with call out number 26 on it in the diagram, right?

[supertek65]

i guess all i had to ask??
what if that pic was turning CW???????????

[timebuilder]

Geez, we almost need "go to meeting" here.

Okay.

The fan marked 25a is now on the other end, turned around so the same edge of the fan hub is closest to the armature, and THAT end (the 25b end) is turning CCW?

That fan will pull towards the armature.

[heavymetaldad]

i understand that it should pull from those motor cooling flanges that you see in pdf and pull out across the stator

and the shaft spins ccw in your pic? it's in backwards

[heavymetaldad]

nope..............i'm wrong.that prop will draw across the rotor thru the stator when spinning ccw

[timebuilder]

i guess all i had to ask??
what if that pic was turning CW???????????

If the shaft in the pic is turning CW, then the flow will be AWAY from the armature, but I don't understand why the airfoil design faces the wrong direction compared to the airflow over a wing.

Unless they are doing that to help reduce cavitation....

I'd have to read something about that fan to really know, but yes, CW in the pic WILL pull from the armature toward the shaft end.

[supertek65]

that is what i thought!!!!!!!!!!!!!!!!!!!!!!!!!

the new fan is on the other way!!!!!!!!!!!!!!!!!!!!

so it was wrong for 45 years?????????????????

and the shaft spins ccw in your pic? it's in backwards

[heavymetaldad]

i have 3 pages open here..........

[heavymetaldad]

that is what i thought!!!!!!!!!!!!!!!!!!!!!!!!!

the new fan is on the other way!!!!!!!!!!!!!!!!!!!!

so it was wrong for 45 years?????????????????

could be.................found a yt oil reservoir drain installed upside down,,,,,,,,,,,,,