OUR DEAR FRIEND HAS CANCER FCS

[supertek65]

yes but you must use an alumina, silca zeolite type of aDsorbant drier such as depends!

And remember to change the filter dryer (under ware) often

[fcs]

And Tum to neutralize the acids

[Bubbleheadski]

well, assuming that the saturated flagellant temperature is 98.6 degrees Fahrenheit, One would accurately measure the sphincter line temperature preferably using a quality meter such as the fluke 52 with clamp on type k thermocouple or any equivalent rtd temperature indicator .
simply subtract the saturated flagellant temperature from the sphincter temperature for example;

leaving sphincter temperature 106.8 degrees f
saturated flagellant temperature 98.6 degrees f

- ----------------
actual superheat 20 degrees f

[/QUOTE]

Uh.... DUDE! Check your math Dr STdickweed!! try 9.2

And..... to answer your question......
ONCOLOGIST :.......... The profession of studying the direct relationship of a service technician in the HVAC industry and the amount of calls received in overtime hrs. Also the quality of service in said hrs.
Pronounced.... ON CALL Ogist! DUH!

LOL

[fcs]

Hey budz hope you had a good day

[Busadad]

Bubblehead, that was good. "ON CALL Ogist! DUH!"

[fcs]

Night all

[mrubin1261]

waiting for that definition in Wikpedia !

LMFAO like 3 times

way to funny Bubble

[Bubbleheadski]

Hey budz hope you had a good day

Sup Homey! Hope You had a good day FCS!
Mine started off..... ok I guess.... Accumulator change out on a stand 10 ft in the air with about 1 ft of room on one side of the stand. Took me 4.5 hrs (also had to changeout condenser fan motor and blade (rusted together) Capacitor and contactor. That went ok (cept wore me out up and down up and down like you in the bed! LOL)
Then went to do a 2 system maintenance at 2:30 (suppose to work the mart at 6pm ) thought I would be done about 5pm..... till the Bomb!
Imagine this..... And no I do not know the solution... (yet). Ran system in cooling. pressures about 53/160 (R22 carrier system v/s ahu) I had a 20-22 sub cool. Looks overcharged right? (about 69 in house and about 63 outside) I had a 30 degree TD!!! again... possibly overcharged right? Seems the fan isnt ramping up. trouble shot the module and motor. (one step says if you have -12vdc going to the motor and when jumpered, fan doesnt run... motor or module bad!) well warranty system... SO I replace the whole motor module assembly. still looks screwy. its late so I place it in heat.... had about 40/210 at 55 degrees outside. Looks undercharged right? Only had a 20 Temp rise. Said screw it... we will come back when you come back in 2 weeks, (they leave sunday back to VA.) Something is not right.... but I dont know if its bad indoor TXV flooding the coil (hot rag increased pressure ) or if somehow the motor circuit bd controls the ramp. Idnt think it does... I think the module controls the ramp.... and the tshooting guide said motor/module. I am lost. Spent 6 hrs there... .and couldnt work the mart!
Any suggies FCS? Come on you da MAN!
Bubz

[Bubbleheadski]

Bubblehead, that was good. "ON CALL Ogist! DUH!"

Thank you thank you..... for my next act!

[Bubbleheadski]

waiting for that definition in Wikpedia !

LMFAO like 3 times

way to funny Bubble

LMAO... now looks who is making who laugh!
Thanks... to bad STdICKWEED logged off!

[spymoocow]

possibly bad sensing bulb....maybe you have junk in the screen?

[supertek65]

i am not good at math!
just science

Uh.... DUDE! Check your math Dr STdickweed!! try 9.2

And..... to answer your question......
ONCOLOGIST :.......... The profession of studying the direct relationship of a service technician in the HVAC industry and the amount of calls received in overtime hrs. Also the quality of service in said hrs.
Pronounced.... ON CALL Ogist! DUH!

LOL[/QUOTE]

[supertek65]

lmmfao!



QUOTE=Busadad;3126302]Bubblehead, that was good. "ON CALL Ogist! DUH!"[/QUOTE]

[Bubbleheadski]

lmmfao!



QUOTE=Busadad;3126302]Bubblehead, that was good. "ON CALL Ogist! DUH!"

[/QUOTE]

LOL..... You are SLOW!

[Bubbleheadski]

possibly bad sensing bulb....maybe you have junk in the screen?

yeah but a hot rag changed my pressures...... nicely I might add!

[timebuilder]

Good morning, FCS!

[Tiger93rsl]

Good morning FCS, hope you have an awesome day.

[Doug Lockhart]

Tiger,
That is the coolest picture in the world.....
Just finishing up at the Vancouver RSES convention..
Have a good day Bret...I'm pullin' for ya.....talk to you tonight..

[A/C guy's chick]

[quote=Tiger93rsl;3128432]Good morning FCS, hope you have an awesome day.




love that pic...mourning FCS.. hope all goes well at the doc's today..

[mrubin1261]

Just like I said FCS ,
Saw a great sunrise this morning, Thanked God for both making it and allowing me another day to appreciate it. Then I asked him to Allow you to do the same.
Hope you have a great day!
Mike