View Poll Results: when will we get to 4,000 posts?

Voters
135. You may not vote on this poll
  • june 12

    34 25.19%
  • june 20

    31 22.96%
  • july 1

    26 19.26%
  • july 12

    44 32.59%
  1. #20502
    Join Date
    Jan 2007
    Location
    Vancouver Island, B.C.
    Posts
    2,485
    Quote Originally Posted by supertek65 View Post
    looking at porn!!!!!!!!!!!!!!!!

    just wondering?

    do you have a transfer switch at your house that automatically brings on the generator??

    also since it gets so frikkn cold there?
    is it diesel?
    does the diesel genset start okay in the cold/ do you have crankcase heaters in it??

    just wondering??????????
    Male or Female??? Just Wondering...

    I had to put a new service in as the old 150A would not handle the two H/P and B/U heat when I moved in 20 years ago. I used the old 150A SqD as a priority panel basically, then run a new 200A panel in the old panels spot with a 8 circuit/150a subfeed!!!. (Triplex O/H, the mast/conduit drop and old panel busses were good for 200A...it was a dumb hybrid panel of SqD for a few years). I then bought a 8KW and put in a backfeed to the 150A...shut off the main into it and feed my 'priorities out of it'...
    I use the 5000 watt Honda and 8000 watt for the 3Hp flush cart on site as 115VAC won't hold....so I just put stabilizer in the fuel....gas....and it's portable and a 'write off'....
    "The quality you deserve is not expensive---it's priceless"

  2. #20503
    Join Date
    Sep 2004
    Location
    Kansas City, Kansas, United States
    Posts
    13,833
    mostly females!!!!!!!!

    sweet gen set up!!!!!!!!!!!!!

    I would like to install one here that will support the entire house!

    Ofcourse internet and cable tv are priorities!!!!!!!!!

    does not look like something I will be doing soon!

    guess I will just freeze like everybody else when the ice storm comes again!!!!!!!!!!









    Quote Originally Posted by Doug Lockhart View Post
    Male or Female??? Just Wondering...

    I had to put a new service in as the old 150A would not handle the two H/P and B/U heat when I moved in 20 years ago. I used the old 150A SqD as a priority panel basically, then run a new 200A panel in the old panels spot with a 8 circuit/150a subfeed!!!. (Triplex O/H, the mast/conduit drop and old panel busses were good for 200A...it was a dumb hybrid panel of SqD for a few years). I then bought a 8KW and put in a backfeed to the 150A...shut off the main into it and feed my 'priorities out of it'...
    I use the 5000 watt Honda and 8000 watt for the 3Hp flush cart on site as 115VAC won't hold....so I just put stabilizer in the fuel....gas....and it's portable and a 'write off'....
    I WILL SELL WORK,GENERATE BUSINESS, GO GET NEW CUSTOMERS!
    YOU SHUT THE HELL UP AND QUIT RUNNING YOUR MOUTH!

  3. #20504
    Join Date
    Jan 2007
    Location
    Vancouver Island, B.C.
    Posts
    2,485
    Just got power on.....yahoo....piss AND be able to flush the toilet....!!!

    Gensets are under $900....get a 16 circuit panel and make a 4/4 SO cord with 4 pin ml twistlock each end (female receptacles in the genny and the wall socket) and your done like dinner for under $1000....
    "The quality you deserve is not expensive---it's priceless"

  4. #20505
    Join Date
    Nov 2006
    Location
    Southeastern Pa
    Posts
    19,560
    Good morning, Bret and everyone!
    [Avatar photo from a Florida training accident. Everyone walked away.]
    2 Tim 3:16-17

    RSES CMS, HVAC Electrical Specialist

    AOP Forum Rules:







  5. #20506
    Join Date
    Jun 2004
    Location
    Location:Raleigh NC
    Posts
    9,667
    Quote Originally Posted by Doug Lockhart View Post
    Male or Female??? Just Wondering...

    I had to put a new service in as the old 150A would not handle the two H/P and B/U heat when I moved in 20 years ago. I used the old 150A SqD as a priority panel basically, then run a new 200A panel in the old panels spot with a 8 circuit/150a subfeed!!!. (Triplex O/H, the mast/conduit drop and old panel busses were good for 200A...it was a dumb hybrid panel of SqD for a few years). I then bought a 8KW and put in a backfeed to the 150A...shut off the main into it and feed my 'priorities out of it'...
    I use the 5000 watt Honda and 8000 watt for the 3Hp flush cart on site as 115VAC won't hold....so I just put stabilizer in the fuel....gas....and it's portable and a 'write off'....
    I have a old Portable 5Kw 115/220 I throw the main and temp tag in if need.

    Glad you got power back. Doug
    If you help others then you are a Success

  6. #20507
    Join Date
    Jun 2004
    Location
    Location:Raleigh NC
    Posts
    9,667
    Hey franke Did you wake Helen up after all your looking?
    If you help others then you are a Success

  7. #20508
    Join Date
    Jun 2004
    Location
    Location:Raleigh NC
    Posts
    9,667
    Morning all,

    Well Karen and I are getting ready to head out for LP. Oh boy
    If you help others then you are a Success

  8. #20509
    Join Date
    Jan 2007
    Location
    Vancouver Island, B.C.
    Posts
    2,485
    Quote Originally Posted by fcs View Post
    Morning all,

    Well Karen and I are getting ready to head out for LP. Oh boy
    Give me a shout when you're done if you feel up to it....
    "The quality you deserve is not expensive---it's priceless"

  9. #20510
    Join Date
    Sep 2004
    Location
    Kansas City, Kansas, United States
    Posts
    13,833
    ONE THOUSAND AMERICAN DOLLARS!!!!!!!!!!!!!!!!!!!!!!!

    I get 30 bucks a week for allowance!!!!!!!!!!!!!




    Quote Originally Posted by Doug Lockhart View Post
    Just got power on.....yahoo....piss AND be able to flush the toilet....!!!

    Gensets are under $900....get a 16 circuit panel and make a 4/4 SO cord with 4 pin ml twistlock each end (female receptacles in the genny and the wall socket) and your done like dinner for under $1000....
    I WILL SELL WORK,GENERATE BUSINESS, GO GET NEW CUSTOMERS!
    YOU SHUT THE HELL UP AND QUIT RUNNING YOUR MOUTH!

  10. #20511
    Join Date
    Mar 2009
    Location
    Several Miles from Sane
    Posts
    1,472

    Allowance for what ?

    Hey FCS, hang in there it will get warmer there sooner or later. Just keep your self vertical and moving forward.


    Quote Originally Posted by supertek65 View Post
    ..I get 30 bucks a week for allowance...
    What do you need that for. You pack your lunch and sleep with the Bar owner.

    What else do you need ? Company buys your tools, right.

    You only deserve 15 bucks if even that much.
    (notice no exclamation points, Frank ?)
    If sense were so common everyone would have it !

    All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!

  11. #20512
    Join Date
    Sep 2004
    Location
    Kansas City, Kansas, United States
    Posts
    13,833
    OMG!!!!!!!!!!!!!!!!!!!!!!!!

    are you somehow spying on me every single day of my life!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!

    you are correct. I am sleeping with the bar owner/ not as much as I'd like!
    and pack a big lunch every day!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !





    Quote Originally Posted by CCIKelly View Post
    Hey FCS, hang in there it will get warmer there sooner or later. Just keep your self vertical and moving forward.




    What do you need that for. You pack your lunch and sleep with the Bar owner.

    What else do you need ? Company buys your tools, right.

    You only deserve 15 bucks if even that much.
    (notice no exclamation points, Frank ?)
    I WILL SELL WORK,GENERATE BUSINESS, GO GET NEW CUSTOMERS!
    YOU SHUT THE HELL UP AND QUIT RUNNING YOUR MOUTH!

  12. #20513
    Join Date
    Mar 2009
    Location
    Several Miles from Sane
    Posts
    1,472

    Why did you do that ?

    Fronk,

    Now you did it, you blew up the page !

    (just and reasonable use of an exclamation point, Ha!)




    If sense were so common everyone would have it !

    All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!

  13. #20514
    Join Date
    Sep 2004
    Location
    Kansas City, Kansas, United States
    Posts
    13,833
    !
    I WILL SELL WORK,GENERATE BUSINESS, GO GET NEW CUSTOMERS!
    YOU SHUT THE HELL UP AND QUIT RUNNING YOUR MOUTH!

Page 1578 of 2295 FirstFirst ... 57810781478152815681571157215731574157515761577157815791580158115821583158415851588162816782078 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event