OUR DEAR FRIEND HAS CANCER FCS

**timebuilder** · 11-21-2009, 03:51 PM

Originally Posted by fcs

you on call this weekend?

Yes. One of the guys I rotate weekends with rolled his ankle. I've been driving him around with me all week because workman's comp says he can have "light duty." That means I drive and climb, and he fills out the paperwork!!!!

**fcs** · 11-21-2009, 03:55 PM

Originally Posted by timebuilder

Yes. One of the guys I rotate weekends with rolled his ankle. I've been driving him around with me all week because workman's comp says he can have "light duty." That means I drive and climb, and he fills out the paperwork!!!!

How long are you doing this

**timebuilder** · 11-21-2009, 04:23 PM

Originally Posted by fcs

How long are you doing this

They are talking about December 1st.

We had been scheduled to do a HX on an only Lennox Epic series RTU yesterday, but we had to scrap that idea because it would take more than just me to haul the thing onto a roof with no knee wall 30 feet in the air.

He can't put weight on a ladder rung because he does not have enough strength in the ankle to prevent the foot from tilting forward and back.

**fcs** · 11-21-2009, 04:28 PM

Originally Posted by timebuilder

They are talking about December 1st.

We had been scheduled to do a HX on an only Lennox Epic series RTU yesterday, but we had to scrap that idea because it would take more than just me to haul the thing onto a roof with no knee wall 30 feet in the air.

He can't put weight on a ladder rung because he does not have enough strength in the ankle to prevent the foot from tilting forward and back.

Oh that would be fun.

**monkeyman#1** · 11-21-2009, 04:41 PM

Originally Posted by fcs

hope the wheels aren't to hard to get off.

A little bit of a pain in the ass, but gotter done in a little less than 6hrs. Still has a little bit of a vibration. I think I am calling carrier on Monday to get their input as to why. Dont have the model number handy. Blower motor was replaced a month ago by another tech, should have corrected things at that time. Pulleys were worn out and contactor pitted, plus vibration, all of which I found on a heating start up/ inspection.

**timebuilder** · 11-21-2009, 05:09 PM

Originally Posted by fcs

Andy has some of my lego's and I got and about 4o plus years ago.

we has him some Lincoln Logs he still has them not quite inot them that much.

When I had Lincoln Logs, they were made out of wood, not plastic!

**Bubbleheadski** · 11-21-2009, 07:46 PM

Hey Gang!
Sup Goosie and Monkey!

**monkeyman#1** · 11-21-2009, 07:49 PM

Hey Bubz, hows things?

**timebuilder** · 11-21-2009, 08:44 PM

Originally Posted by monkeyman#1

A little bit of a pain in the ass, but gotter done in a little less than 6hrs. Still has a little bit of a vibration. I think I am calling carrier on Monday to get their input as to why. Dont have the model number handy. Blower motor was replaced a month ago by another tech, should have corrected things at that time. Pulleys were worn out and contactor pitted, plus vibration, all of which I found on a heating start up/ inspection.

Did you replace the shaft? Could have a slight bend in it.

**fcs** · 11-21-2009, 09:40 PM

Originally Posted by timebuilder

Did you replace the shaft? Could have a slight bend in it.

Good point been there done that

**fcs** · 11-21-2009, 11:02 PM

Night guys

**Tiger93rsl** · 11-22-2009, 12:17 AM

Good Evening, just got in from a 14 hour day. Going to have a hot shower, cold beer, then bed. Hope everyone had a good Saturday.

**james80031** · 11-22-2009, 12:25 AM

Originally Posted by Tiger93rsl

Good Evening, just got in from a 14 hour day. Going to have a hot shower, cold beer, then bed. Hope everyone had a good Saturday.

did any of those motors fit?

View Poll Results: when will we get to 4,000 posts?

Thread: OUR DEAR FRIEND HAS CANCER FCS

Thread Tools

Search Thread

Display

Posting Permissions