Originally Posted by
mark beiser
It's "The Thing That Wouldn't Die"!
It developed a limp, but a new low side transducer got it up and running in calibration again.
It doesn't see daily use anymore, as it is one of 4 working digital sets I have, but it is my go to gauge set for contaminated systems and refrigerant recovery since I don't own any analogue gauges anymore.
BTW, what ever happened with the Paradigm manifold?
With the Paradigm, I am still working/doing tests myself as the HF refrigerants wash out the oil so bad, they stick and hang up after you leave the manifold hanging in the van for 4 days or so....
I am also looking at the substitution of the center shuttle valves for ball valves as they are not quite a subject to the drying of the O-rings.....
"The quality you deserve is not expensive---it's priceless"