Evap Coil 2004 AmStd ... TXA-030C4HPCO ... 4103TBT50(or G) ....
A/C AmStd Allegiance 11 … 2.5 ton ... Model # 2A7A1030A 1000AA (per sticker) … Mfd date July 2004 R-22 coolant ... Split System ... 1440 Sq. ft. Home
The coil #'s are accurate I believe. But were impossible to see (no door on coil to open), without several hours of work using a small mirror taped to the end of a bent hanger, using a flashlight, & videoing it by zooming, & then replayed it.
Can a R410 refrigerant TXV be properly installed & used on this coil?
Can this coil even use R410?
If yes, would the appropriate TXV be ... "4AYTXVH3D1831A" ... or is there a better suited one to use?
Am I correct that this is a 30,000 BTU coil?
Can this coil fully operate with a Trane XV95 ComfortR & an appropriate Tstat, that includes additional humidity control?
Would new refrigerant lines have to be run?
What else should I be concerned about?