+ Reply to Thread
Results 1 to 15 of 15

Thread: You Won't Believe This!!!!

  1. #1
    Join Date
    Jul 2000
    Location
    Columbia, SC. USA
    Posts
    1,144
    Post Likes
    Take a look at these pics: The first one is from the front, This is a 3.0 ton heatpump Air-handler that had been installed in-place of a gas furnace by annother company a couple of years ago....




    The second one is the main reason the customer's electric bill was over four times the normal ammount......




    As you can see the old cooling coil was left in place in the ductwork...not attached to a condensing unit at all...it is filthy, and the gap you see in the ductwork was there when we arrived...there must have been two tons of air coming out of this gaping hole!!!!

    How about the nice insulating job here on these returns!!!



    This gas line isn't capped off...there is no high voltage disconnect.....the indoor coil on the heat-pump is filthy because a filter was never installed.....There was a total of 5 supply ducts lying on the ground, blowing into the crawler.....





    The drain was never hooked up...had drained into the crawler all summer....What a huge mess!!!! It's gonna cost her a bundle to fix it...Have fun fellas!!



    [Edited by Boss on 12-28-2003 at 10:36 PM]

  2. #2
    Join Date
    Jan 2002
    Posts
    1,503
    Post Likes

    Angry That's so bad it's not even funny

    OMG!

    what a shame...

    Don't forget to check for the correct size service to the a/h and that the circuit breakers are correct size.

    Are permit's req'd for a changeout where you live? Was the elctric co involved (here they will pay the cust $500 to change from gas to electric)


    those hacks should do jail time/community service for that job

  3. #3
    Join Date
    Mar 2002
    Posts
    147
    Post Likes
    is it just me or did the pics disappear?

    alm ii

  4. #4
    Join Date
    Apr 2000
    Posts
    1,303
    Post Likes
    imagewiz is doing repairs and upgrading, should be okay by tomorrow.

    Boss

  5. #5
    Join Date
    Oct 2001
    Posts
    6,071
    Post Likes
    Originally posted by Boss
    imagewiz is doing repairs and upgrading, should be okay by tomorrow.

    Boss
    I thought I broke it! I uploaded the pictures of our Cracker Christmas Dinner, and when I returned to the thread, no one's pictures would work!
    Hindsight is NOT a plan!

  6. #6
    Join Date
    Sep 2002
    Location
    The Alamo
    Posts
    3,043
    Post Likes
    It may cost alot to have these repairs made but think how much it has cost to run the system this way for all of those years.
    Read, read, read!

  7. #7
    Join Date
    Nov 2002
    Location
    Piedmont Triad area of North Carolina
    Posts
    2,300
    Post Likes

    Talking

    Is that one of the gas fired heat pumps?...

    Unreal!

  8. #8
    Join Date
    Apr 2001
    Location
    San Antonio, TX
    Posts
    2,217
    Post Likes

    I hate calls like that

    Trying to work under a house is bad enough but throw in two dead bodies and you have a nightmare.
    Breeze

  9. #9
    Join Date
    Jun 2002
    Location
    Bemidji, Mn
    Posts
    3,573
    Post Likes
    Wow...... Definetly replace and do it right IMO!
    You picked a fine time to leave me loose wheel...

    http://rapalaguy.spaces.live.com/

  10. #10
    Join Date
    Jun 2002
    Location
    Bemidji, Mn
    Posts
    3,573
    Post Likes

    Re: I hate calls like that

    Originally posted by Breeze
    Trying to work under a house is bad enough but throw in two dead bodies and you have a nightmare.
    I hope this didnt happen to you !
    You picked a fine time to leave me loose wheel...

    http://rapalaguy.spaces.live.com/

  11. #11
    Join Date
    Mar 2003
    Posts
    12
    Post Likes
    proof that drunks and dopeheads can get employment.rk
    good time to get into mold remediation.

  12. #12
    Join Date
    Aug 2002
    Location
    Southern Utah
    Posts
    38
    Post Likes
    what about the gas line. flex is not supposed to make more than a 90 degree bend. also, the old grey stuff is no longer approved!!

  13. #13
    Join Date
    Feb 2003
    Posts
    1,173
    Post Likes
    Originally posted by hilcodil
    what about the gas line. flex is not supposed to make more than a 90 degree bend. also, the old grey stuff is no longer approved!!
    Worse yet. That wrinkled duct tape. Nothin shows poor workmanship like wrinkled duct tape!
    Watts New, Ohm My, I been Electrically Commutated. Are U2.

  14. #14
    Join Date
    Apr 2001
    Location
    Camel City, NC
    Posts
    6,234
    Post Likes

    Thats a mess

    Glad to see I'm not the only one that loves crawlers.
    Be safe not fast. body parts don't grow back

  15. #15
    Join Date
    Apr 2001
    Location
    San Antonio, TX
    Posts
    2,217
    Post Likes

    Re: Re: I hate calls like that

    Originally posted by Chad711
    Originally posted by Breeze
    Trying to work under a house is bad enough but throw in two dead bodies and you have a nightmare.
    I hope this didnt happen to you !
    I was talking about the legs in one of those pics.

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •