snow cone anyone?

**Aaron G** · 02-18-2009, 09:01 PM

**austyman** · 02-18-2009, 09:56 PM

thats the new camoflaugh design for theft protection

**james80031** · 02-19-2009, 12:34 AM

At least they didn't try to de-ice it with an ice-pick.

**papa_jo** · 02-19-2009, 11:23 AM

Originally Posted by james80031

At least they didn't try to de-ice it with an ice-pick.

I knew I didn't need that tool anymore after refrigerators went to frost free

**rayr** · 02-19-2009, 12:57 PM

Gonna be a while before he needs to use those gages!!

**fcs** · 02-19-2009, 01:31 PM

Hey look, It's a snow machine for a ski resort. I want to work on one of those.

**knewguy** · 02-19-2009, 04:21 PM

I see the problem.

It went way past beer can cold.

I'm glad I could be of help.

**james80031** · 02-19-2009, 05:48 PM

Originally Posted by papa_jo

I knew I didn't need that tool anymore after refrigerators went to frost free

I still use one to line up sheet metal holes.

**skippedover** · 02-19-2009, 09:15 PM

Love the wiring job on that puppy. Can't understand why the tech was called out? Looks like a perfectly nice plaster job to me!

**badbillr** · 02-19-2009, 09:31 PM

James,

Don't get rid of it yet.. refrigerators went frost-free, the addition of a heating element, termination switch & defrost timer, is what made them frost-free. If the heater goes out, it will frost & freeze over for sure. Helpful hint, when checking a domestic refrigerator for system performance & operation: the evap coil must develope a light frost pattern from start to end of the coil, but not extending through the cabinet to the outside of the box. This is the final check for most refrigerator manufacturers. If the frost pattern goes outside the box, they remove a very small amount of refrigerant. If it does not extend to the end of the coil, they add a very small amount of refrigerant.