I have a recent Bryant Evolution install. I like it so far. I have only had it on-line about four days. It is a hybrid system. My issue: I set it back to 60 degrees at night to come back up to 68 degrees at 6:00 am. Outside temps have been in the mid to low 30's. The problem: It is "late" in coming up to temp. It takes an additional hour or more for the house to get up to 68 degrees. In other words it is not 68* until 7:00am or later.
Will the system "learn" what it has to do to meet the 7:00am time frame or does my tech need to come back and do some additional programing. It seems either it is not starting early enough or it is not in the correct stage to allow for the make-up in temp in the time frame. It does show that it is in the auxillary heat mode thus it is using NG as opposed to the heat pump. Thoughts?? Thanks. Mike L.