Thread moved to Commercial Food Service and Equipment.
You might get responses from here.
I don't normally work on dishwashers,
However I would like to know if anyone knows how to change out the small magnetic floats in a Hobart dishwasher. #00-122674 float kit.
Thanks,
Thread moved to Commercial Food Service and Equipment.
You might get responses from here.
what model hobart? lx30? lx30I?
it attaches with a c clip and a hook......small flat screwdriver to pop off the clip is all you need....5 minutes or so
Thanks,
I didn't want to tear it up, not knowing how to change them.
I will try the small screwdriver and see if I can pry the C-clip out of one.
Thanks again for the response to my question.