Results 1 to 9 of 9
  1. #1
    Join Date
    Mar 2018
    Location
    Chico, Ca #StateofJefferson
    Posts
    19
    Post Likes

    Vacuum hose tree of doom

    Hey guys, I can’t believe I’m having trouble locating this as I know I’ve seen it before. Trying to find who sells a brass tee- 3/8” flare on one side to go onto the 3/8” male fitting on my vacuum pump, then up probably 4” with two 1/2” male thread fittings at the top to attach my two 1/2” appion hoses with 1/2” female fittings. I’d prefer if they (1/2”) were parallel to each other but I’m not going to nitpick.
    I’ve looked online, talked to trutechtools, Baker distributing, Ferguson, my service manager and my lead tech and I get blank stares. Appion sells something like this in their MegaFast or whatever evacuation kit, but that’s $600. Anyone? Bueller?

  2. Likes DavidDeBord liked this post
  3. #2
    Join Date
    Apr 2007
    Location
    Tucson, Arizona
    Posts
    1,131
    Post Likes

    You’re looking for the yellow jacket vacuum tree. I have one that came in the Appion mega flow kit. I have seen them at supply houses, but it’s been a while. Found many listed online with a quick google search.
    There are two ways to do things, Right and Again.

  4. Likes DavidDeBord liked this post
  5. #3
    Join Date
    Mar 2018
    Location
    Chico, Ca #StateofJefferson
    Posts
    19
    Post Likes
    Thread Starter
    I came across all of these as well in my initial search. While all of these products have a flared female end in 1/2" or 3/8", none of them have the two male thread ends in 1/2". Lots of choices if you want 1/4" or 3/8" but none I've found that will take my vacuum hoses

  6. #4
    Join Date
    Jan 2005
    Location
    Akron
    Posts
    1,649
    Post Likes
    Quote Originally Posted by Makeitcold View Post
    I came across all of these as well in my initial search. While all of these products have a flared female end in 1/2" or 3/8", none of them have the two male thread ends in 1/2". Lots of choices if you want 1/4" or 3/8" but none I've found that will take my vacuum hoses
    Buy the YJ, and unscrew the 2) 3/8" SAE Flare x 1/4 MPT fittings and screw in two 1/2" SAE Flare by 1/4" MPT fittings. You could likely also just to United Refrigeration and find what you need in the brass fittings selections. One note, I would use leak lock red for all of the fittings, not for sealing, but because it dries and will not outgas as much in a vacuum.

    Jim
    JLB,

  7. #5
    Join Date
    Jan 2007
    Location
    Mn the state where absolutey nothing is allowed
    Posts
    2,059
    Post Likes
    build your own... if your using CRTs even a tiny leak on the homemade rig wont matter as most working pumps will overcome it and still pull a deep vacuum. but hey, it is our(your) job to create leak free systems, how hard can it be....
    my boss thinks its possible to repeal the laws of physics

  8. #6
    Join Date
    Dec 2004
    Location
    Chicago area
    Posts
    4,782
    Post Likes
    Sounds like all you need is a 1/2” flare union and a 1/2” flare tee.

    Or TTT and others sell really short 1/2” x 1/2” hoses if you want an o-ring type seal for finger tightening everything together.


    Sent from my iPhone using Tapatalk

  9. #7
    Join Date
    Dec 2004
    Location
    Chicago area
    Posts
    4,782
    Post Likes

    Vacuum hose tree of doom

    Another option would be to get a couple braze on 1/2” male flare taps, and some 1/2” tubing with a flare nut, and make your own that way.

    There are lots of ways to fry this egg. You just need to be a little more creative.


    Sent from my iPhone using Tapatalk

  10. #8
    Join Date
    Dec 2004
    Location
    Chicago area
    Posts
    4,782
    Post Likes
    Also, the standard megaflow Appion hose if thats what you have is 3/8 x 1/4 but the hose is 1/2” or a little more.


    Sent from my iPhone using Tapatalk

  11. #9
    Join Date
    Mar 2013
    Location
    Billington Heights, NY
    Posts
    16,762
    Post Likes
    that YJ tree is a PILE of

    braze all those fittings to the manifold. They all leak.
    Experience - knowing when to get the hell out of the way and plug your ears. "Don't be a sissy. Turn it on!"

    Glennac - Failed my biology test today: They asked, "What is commonly found in cells?" Apparently "BL*** people" wasn't the correct answer.
    Poodle Head Mikey - "the world is well populated with the unknowing and the uncaring and the stupid."

  12. Likes Everlong liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.