Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2015
    NE, PA
    Post Likes

    Heatilator Help Please

    Hello guys, new homeowner here! Rented a dumpster and completely gutted the basement to studs (had paneling). I've since hung drywall and have a pretty large brick fireplace (half underground) with of course non other than a heatilator (1978 house built). I am writing this post because I am going to go all out on my basement and since I started from studs, I want to do everything correctly. This includes removing this heatilator (unless someone tells me not to but it seems the right thing to do is remove). My plan is using natural stone ledger panels over the brick but I really don't want to do anything until I get this heatilator situation figured out.

    Right now I don't burn from it and it looks fairly decent compared to others but still a bit rusted. I don't plan on burning from it either anytime soon as well (I have a free standing stove in my sunroom). I basically just want to future proof everything IN case down the rode I can have options whether I want to do a gas insert/wood insert,ect. And from reading about others it seems part of future proofing anything related to this fireplace would be removing this thing first. What would it cost in removing something like this? I live in NE Pennsylvania and it seems people I am calling have no interest in this or don't even know what I am talking about when asking if they can remove. Any have any contacts to someone around this area? Please help. Thanks.Name:  Fireplace (1024x768).jpg
Views: 94
Size:  82.1 KB

    **Red line is marked to show everything above it is above ground. Everything below is below ground.

  2. #2
    Join Date
    Aug 2004
    S.E. Pa
    Post Likes
    You need to hire a pro to perform a level II inspection first. That will determine the suitability of the chimney even if you blow out the steelform fireplace and rebuild the firebox with masonry. There is a procedure on how to torch these things out but that often results in fires. I recommend removing enough bricks to pull the unit out. A pro can detail how this is done and do the work properly. Regardless the end result must comply with the codes if it is to be used. You can search for a Certified Chimney Sweep or check the PA Chimney Sweep Guild for a contractor near you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.