Results 1 to 7 of 7
  1. #1

    Combi Rational Oven

    CPC-102 Can't get the fan wheel off the motor shaft. I've pulled the bolt out of the shaft but it won't budge. Any ideas?
    Thanks

  2. #2
    Join Date
    Feb 2008
    Location
    Altmar, New York, United States
    Posts
    4,697
    A PLASMA CUTTER.

  3. #3
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,174
    19

    Don't post the same question in multiple forums, Thank you.

    The other thread has been deleted.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  4. #4
    Join Date
    Oct 2006
    Posts
    10
    have you tried a hub core puller? oiling the shaft and sliding the wheel back and forth? if your replacing the motor sometimes your best bet is to order the motor and the wheel, and just cut it out with a recipricating saw

  5. #5
    A puller didn't work until we heated it with a torch. Turns out the shaft is tapered.

  6. #6
    Join Date
    Jan 2008
    Posts
    118
    I havent worked on one in over ten years but blodgett blower wheels and rational years ago had threads in the blower hub so you could use a bolt to push off the wheel.

  7. #7
    Join Date
    Feb 2009
    Location
    Suffolk Co. N.Y
    Posts
    49
    most of the times you wont be able to split them. if it like a southbend or a garland. they aint comming apart. from the years and temps. they fuse together. anytime i order a motor for a oven i also order a fan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event