Results 1 to 7 of 7
Thread: Combi Rational Oven
Hybrid View
-
02-02-2009, 01:36 PM #1
New Guest
- Join Date
- Jan 2009
- Posts
- 2
Combi Rational Oven
CPC-102 Can't get the fan wheel off the motor shaft. I've pulled the bolt out of the shaft but it won't budge. Any ideas?
Thanks
-
02-02-2009, 01:41 PM #2
Professional Member*
- Join Date
- Feb 2008
- Location
- pulaski ny
- Posts
- 1,616
A PLASMA CUTTER.
-
02-02-2009, 04:05 PM #3
Global Moderator
- Join Date
- Jan 2004
- Location
- Lancaster PA
- Posts
- 62,204
19
Don't post the same question in multiple forums, Thank you.
The other thread has been deleted.
-
02-06-2009, 12:42 AM #4
Regular Guest
- Join Date
- Oct 2006
- Posts
- 10
have you tried a hub core puller? oiling the shaft and sliding the wheel back and forth? if your replacing the motor sometimes your best bet is to order the motor and the wheel, and just cut it out with a recipricating saw
-
02-06-2009, 02:26 PM #5
New Guest
- Join Date
- Jan 2009
- Posts
- 2
A puller didn't work until we heated it with a torch. Turns out the shaft is tapered.
-
02-08-2009, 08:20 PM #6
Regular Guest
- Join Date
- Jan 2008
- Posts
- 112
I havent worked on one in over ten years but blodgett blower wheels and rational years ago had threads in the blower hub so you could use a bolt to push off the wheel.
-
02-11-2009, 11:05 AM #7
Regular Guest
- Join Date
- Feb 2009
- Location
- Suffolk Co. N.Y
- Posts
- 45
most of the times you wont be able to split them. if it like a southbend or a garland. they aint comming apart. from the years and temps. they fuse together. anytime i order a motor for a oven i also order a fan
Reply With Quote
