Results 14 to 26 of 43
Thread: Nice boiler
-
11-30-2002, 01:25 PM #14
Professional Member*
- Join Date
- Nov 2002
- Location
- Central Florida
- Posts
- 655
I've always enjoyed the "other" method of taking the cast iron sections apart. A 14 pound sledge and a good face shield. I agree with the order but the much smaller peices left by the "sledge mehod" are easier to handle.
-
11-30-2002, 09:08 PM #15
Probably 4-6 sections
Still would want to use leverage to get the sections out, the lift out would be around 5 feet, too high to be comfortable.
Pretty sure I'm high on this one, the competition used to be a used car salesman. (True story)
With luck I can post some more horror pictures, those of his install.
-
12-01-2002, 10:15 AM #16
Professional Member*
- Join Date
- Nov 2002
- Location
- Central Florida
- Posts
- 655
Having literally broken my back setting a boiler, I stronly recommend using any lifting advantage available. Sometimes the "short cut" winds up taking several years to recover from. I am however, very serious about using sledge to break the cast iron into smaller peices. If this boiler is as old as it looks the cast will be brittle. The first few, maybe up to 10 or so, blows will bounce pretty hard and then after that you will start hearing a difference in the sound. Then on one hit, it will shatter if your lucky, and if not you just get a big hole. From there you move out and the peices can be as small as you want.
Again a good clear face shield, I use long welders gloves, and a good heavy pair of jeans, with a heavy shirt. A hard hat that will stay on and something to protect you ears.
The other things this does is provide an oppurtunity to a lot of stress release. If you do get the job be careful, that beast has been changed down so long its hard to tell where it will go!
-
12-10-2002, 05:05 PM #17
Professional Member
- Join Date
- Aug 2002
- Location
- Southern NJ
- Posts
- 962
the boiler looks pretty old, Ill bet Jesus did the original start-up. The chain looks even older. BUT the in line filter looks pretty new..... I wonder if the filter element is as old as the mother in law????????
-
12-10-2002, 08:16 PM #18Maybe Collin ran into Zed and "the Gimp" down there.Originally posted by wolfdog
The basement Troll is chained to the boiler?The way we build has a greater impact on our comfort, energy consumption and IAQ than any HVAC system we install.
http://www.ductstrap.com/
-
12-10-2002, 09:36 PM #19
The collar
I just don't get it... I have really never seen anything quite like that going into a chimney...... can someone explain to me what they did there????? And why???

___________________________________________
-
12-10-2002, 09:38 PM #20
It reminds me of...........
a bad episode of Junkyard Wars........
___________________________________________
-
12-11-2002, 08:21 PM #21
Regular Guest
- Join Date
- Dec 2002
- Posts
- 173
Sure glad it's your job and not mine
-
12-12-2002, 09:51 PM #22
Just got the word
We got the job.
They had three bids, we were the middle one
I'll post our work after it's done.
-
12-12-2002, 09:54 PM #23Definately no "Gimp" down there! I would be Bruce Willis in that senario!Originally posted by Carnak
Maybe Collin ran into Zed and "the Gimp" down there.Originally posted by wolfdog
The basement Troll is chained to the boiler?
-
12-12-2002, 10:02 PM #24
Lol
Q: Are you alright?
A: I'm pretty #@$%&*^ far from alright!
The way we build has a greater impact on our comfort, energy consumption and IAQ than any HVAC system we install.
http://www.ductstrap.com/
-
12-12-2002, 10:26 PM #25
Someone is about to get medieval.
-
12-12-2002, 11:09 PM #26
Professional Member
- Join Date
- Aug 2000
- Location
- USA
- Posts
- 4,935
Ya lets bring out the gimp. Iny Miny Miny Moe. ROFLMAO
Zeds dead though!!!
Originally posted by Carnak
Maybe Collin ran into Zed and "the Gimp" down there.Originally posted by wolfdog
The basement Troll is chained to the boiler?Your poor planning does not constitute an emergency on my part!!!!


Reply With Quote