Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2009
    Location
    SE Kansas
    Posts
    33

    Trane package heat pump

    Went on a call, the office unit was not keeping up got down to 65 yesterday.
    So I check the charge no problem flip the stat to em. heat checked my amp draw 2.4 amps? for 10 kw checked voltage had 208 1 phase started looking at the way it was wired somethings not right checked the name plate the dummys that put it in installed a 480 volt 3 phase heat section. Its been in for a year you would have thought they would have notice the lack of heat last year

  2. #2
    Join Date
    Jan 2009
    Location
    SE Kansas
    Posts
    33
    Also who was the numbnuts that thought of putting the outdoor coil above all the panels

  3. #3
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,043
    Trane is copying York & Carrier

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event