Your favorite tools
I love my klein six in one and linesman pliers.
Double sided ratcheting wrench. From Sears. 1/4 and 5/16 for those hard to get after cabinate screws. I think I paid $6 and use it almost every day.
I will buy the next stubby 1/4 and 5/16 nutdrivers I see for the same reason.
6" Pipewrench for getting rounded valve ends to turn when some dumba@@ used his crescent wrench to open those valves on a refer unit.
Cordless impact driver.
1/4" thumbwheel driver.
channel locks for opening service valves.
veto tool bag. the XL variety.
After that, I'm liking this weiss dual input digital thermometer.
It's great to be alive and pumping oxygen!
My favorites that I use at least once a day are my Klien 6" magnetic 1/4 and 5/16 nut drivers and my Fluke 52-2.I use them almost every call and I would be lost without them.
Look to the past to learn;look forward to live.
Coach Dean E. Smith
VACO clear blue handled screw driver with reversable silver shaft,and 3/8ths opening for all those Trane rooftop screws....they went Klein/Vaco and it was not seen since.
No doubt, my Bosch pocket driver.
We've been doing so much,for so long,with so little, that now we can do almost anything, with nothing at all.
Originally Posted by a\c don
Life is too short, Behappy!
......but my flashlight. I like to see what I am doing.
"Excellence is the gradual result of always striving to do better"
my irwin 10 in 1.
Fixed a lot of stuff with just that.
"If you call that hard work, a koalas life would look heroic."
VETO PRO PAC, The Official Tool Bag of HVAC-Talk.com
Testo... you guys rule!
my 18inch 5/16 nut driver used specifically for removing Trane rooftop unit hsi's without cuting myself on the upside don piece of channel. Everything done fro outside the compartment its a kline fyi
toss up between my leatherman or alligator channel locks