Pipe clamp thermocouple for Fluke 902

[troywoodall]

I'm looking for a pipe clamp thermocouple for my 902. All the ones I've seen use the type K plug, and my 902 only has the banana plugs. Do I have to get an adapter, or is there a thermocoupled that will work with my unit? Thanks, as always!

[Pascone10]

fluke sells a plug that will work as an adapter for the K type... let me find it

[Pascone10]

http://www.testpath.com/Items/Thermo...or-116-130.htm

Not a bad price

[KLEINman]

http://www.drillspot.com/products/72...couple_Adapter

here ya go, this is what you need. Beat ya to it Pascone10


Maybe not lmao!!!

[Pascone10]

http://www.drillspot.com/products/72...couple_Adapter

here ya go, this is what you need. Beat ya to it Pascone10


Maybe not lmao!!!

not fast enough....

maybe next time grasshopper!

[KLEINman]

not fast enough....

maybe next time grasshopper!

We posted at the same time smarta@# lol, the website just like you better

[HeatXfer]

Hit an electronics store or order from Omega and the make your own. Pick up a cheap ratcheting plastic clamp from a home improvement store and make your own.

Your a service guy, use those "field skills".

[troywoodall]

Hit an electronics store or order from Omega and the make your own. Pick up a cheap ratcheting plastic clamp from a home improvement store and make your own.

Your a service guy, use those "field skills".

I'd rather have the flexibility that the adapter will give me, as far as using different types and brands of K type probes.

[KLEINman]

I'd rather have the flexibility that the adapter will give me, as far as using different types and brands of K type probes.

Very true, get yourself either a fluke pipe clamp or another brand if you dont already have one.

[tarheel_tech]

My adapter came with my Fluke 16,just don't use it that often.I rather use my 52 II

[jpsmith1cm]

I have both the Fluke 80pk-8 and a Fieldpiece pipe clamp. I have tested them side-by-side and see no real accuracy difference between the two.

Both have an application because one fits where the other won't.

I've done the make-a-clamp trick, too, but purpose built instruments work better. Tested that, too.

[troywoodall]

Found this adapter on Ebay. Looks a little fragile than the Fluke, but it's less than half the price and looks like it fits a bunch of other arrangements as well.>http://cgi.ebay.com/K-Thermocouple-A...QQcmdZViewItem