Results 1 to 4 of 4
  1. #1

    Bryant T6 Thermidistat

    I have a T6 stat with correct ac voltage and correct dc voltage and polarity. The face plate doesn't power up. Any ideas?

    Thanks

  2. #2
    Join Date
    Apr 2004
    Location
    Midwest
    Posts
    2,682
    What is your voltage on V+ and Vg at the stat? Not trying to be a smart arse, but is the pigtail plugged into the stat?
    Live each day like it is your last, for one day you will be right!

  3. #3
    Its around 17.70 DC and the pigtail is plugged in.

  4. #4
    Join Date
    Apr 2004
    Location
    Midwest
    Posts
    2,682
    Sounds like a bad stat to me, not much more you can check other than your pigtail connections.
    Live each day like it is your last, for one day you will be right!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event