After using the 4 valveYJs titans I wouldn't want to use anything else. I would not want to go back to a 2 valve set they just make pulling a vac so much easier and the forth valve works perfect for hooking up your vac guage. That said the digis sure do look cool but since i spend more time in the office than the field i just cant see getting them and I dont want to spend that much for my techs to abuse.
Certified,qualified and can do it cause were used to it.
This is what i use.
Originally Posted by beachtech
Aire Serv of SW Connecticut- Gas heat, dual fuel and central a/c systems installed and serviced
and you think a 4 valve manifold make it easy...
Originally Posted by Indoor Comfort
i can show you easier and much faster, without a manifold!!
and if we wanted a homeowners opinion, we would have asked...
Originally Posted by emcoasthvacr
if it was a good micron gauge it would have came with some instructions telling you to mount it in the system as far from vacuum pump as possible. those instructions will and should also say that exposing the sensor to any oil will ruin it.
Originally Posted by NathanVanKCMO
I am waiting until digi-cools new manifold comes out. They look awesome
1 -yj titan r-134a/404
1- yj titan r410a
1- uniweld r410a (backup)
1- robinair r22
1- yj brute r-22
want to get a set of digital gauges preferbly the yellow jacket one
Originally Posted by cory321
what you waiting for??