Results 1 to 13 of 18
-
01-30-2009, 06:38 PM #1
Another New Construction Head Scratcher...
I can just imagine what was smoked before this one was put in...

Note the lovely 7" bypass pipe that's bypassing UNFILTERED air into the blower on the opposite side of the EAC. This furnace is a 5 ton drive, it requires a bottom return or two side returns. This is clearly not correct. To top it off, the ducts are full of drywall dust and it's being drawn directly into the motor vents.
The trunk (not pictured) is not hung straight, and the panning is all cardboard Thermopan that's sagging and brittle from being wet at some point.
Think twice before you buy a new home from a "cookie cutter" builder."Why must I lose to this idiot?!"
Chess Master Aron Nimzovich, after jumping on the table...
-
01-30-2009, 07:11 PM #2
at least they used hard duct not flex
-
01-30-2009, 09:05 PM #3
And where is the moron inspector?
-
01-30-2009, 11:38 PM #4
Wouldn't suprise me if that is a 4" screw going into the HE..
People are stupid.If at first you don't succeed; charge, charge, charge again.
-
01-31-2009, 01:00 AM #5
do you really think the inspector got out of the truck and in the front door.
-
01-31-2009, 01:03 AM #6
what is with the carpet and tile right there. is that thing in the middle of a room? I see a toy car in the backround
-
01-31-2009, 05:59 AM #7
Interesting, and no PVC primer.
If you really know how it works, you have an execellent chance of fixin' er up!
Tomorrow is promised to no one...
-
01-31-2009, 08:46 AM #8"Why must I lose to this idiot?!"
Chess Master Aron Nimzovich, after jumping on the table...
-
01-31-2009, 12:50 PM #9
Professional Member
- Join Date
- Feb 2006
- Posts
- 507
that must have been installed by one of Dave's Premier Dealers!
haha
-
02-01-2009, 12:44 AM #10
Professional Member
- Join Date
- Apr 2002
- Location
- waco,tx
- Posts
- 85
thats one of those A/C Turbochargers that those guys are talking about in their full page adds that claim to "turbo charge your a/c for $29.95"
Go Away
I'm Busy!
-
02-01-2009, 06:18 AM #11
He was following the install instructions.
With that 7" he has return to 2 sides. ROFL
-
02-03-2009, 07:20 AM #12
Professional Member
- Join Date
- Jun 2005
- Location
- North Richloand Hills, Tx.
- Posts
- 37
The installer must be married to inspectors mom...........
-
02-03-2009, 04:54 PM #13
Professional Member
- Join Date
- Jan 2007
- Posts
- 31
Just a thought maybe the installer never got a permit to begin with.....


Reply With Quote
