FX-40 n2 tunneling
Although I haven't had much success.
I followed the Workbench Help instructions as well as possible.
I am still not able to perform N2 serial Tunneling Through an FX-40
Is there some item on my Laptop ,not explicitly mentioned, that needs to be configured ?
Using ProComm it is possible to configure/edit points in an N-30 and N-31
Is it possible to do the same on an FX-20 or FX-40 using N2 CommPro ?
Hyperterminal is a dead end.
Originally Posted by cleancondenser
Freddy, does this mean you actually got it to work?? JCI promised something and actually followed through? What's this world coming to??
Wishful thinking..this is a workaround that somewhat works..Its stubborn at times with latency issues, especially when connected over the internet.
Originally Posted by ddcfreek
I guess I'll keep hoping then...
Oh well,I guess it is back to the drawing board
Unfortuneately, that is the same diagram I got from Johnson.
I tried it again and no luck.
Is there anything regarding my internet ports(80) that has to be changed?
And judging from the other post, is this another one of those JCI fantasy services that are offered their FX controllers.
The FX-16 literature states that you can connect it to a modem,
and to dial into it and have it dial out.
We latter found out from JCI that this was not really an option,although
they were researching it.