Post your nightmare job pics here!

[HeyBob]

You have until 9 PM tonite!




POST THEM HERE

[vmc1161]

Any job with this guy ....



.

[jpb2]

Now thats funny

[HeyBob]

LOL.......too funny, look at those knobby knees!

[Twilly]

Not for the faint of heart

[beachtech]

lol i don't wanna remember the nightmares!! therefore i don't take pics of them

[I_bend_metal]

You mean like this one???



2 Ton Coil and AC with 8 X 14 plenum coming off and going into a finished ceiling...

Furnace has a 3 ton drive....on LOW it was .91 static....HIGH was 1.4

[Texas-Tech]

Not sure how this is gonna work but here is my nightmare, ongoing might I add. 32 split systems, half installed between the old concrete roof and the new metal roof, uninsulated as you can see. They are all heat carrier heatpumps including 4 of the fresh air only air handlers like the first pic. Still not completed yet.

Didn't know it was for a tool bag, and just to make it conform to the contest the bag wouldn't have helped me here cause it is to heavy to drag around in such a confined space and I already have a veto anyway............................................ ............................sorry.

[HeyBob]

You mean like this one???



2 Ton Coil and AC with 8 X 14 plenum coming off and going into a finished ceiling...

Furnace has a 3 ton drive....on LOW it was .91 static....HIGH was 1.4

How would the tool bag help you on that job?

Here are the rules.

How To Win


There are two ways to win.

1. You must show us your worst nightmare job (a picture) and describe how this tool bag would of helped you do a better job, get done faster, etc.

OR


2. You want to buy one but your wife/girlfriend/significant other will not let you spend the cash. So, she must write a paragraph for you stating why YOU need this bag to keep you from coming home so grumpy.


That's it guys. You can do either 1 or 2 to win this bag OR you can do both to better your chances!! The Veto guys will be judging for original style points and ingenuity for the best entry. Enter as many times as you like and HO HO HO from Veto and your Mod's.

[HeyBob]

How would the tool bag help you on that job?

Here are the rules.

How To Win


There are two ways to win.

1. You must show us your worst nightmare job (a picture) and describe how this tool bag would of helped you do a better job, get done faster, etc.

OR


2. You want to buy one but your wife/girlfriend/significant other will not let you spend the cash. So, she must write a paragraph for you stating why YOU need this bag to keep you from coming home so grumpy.


That's it guys. You can do either 1 or 2 to win this bag OR you can do both to better your chances!! The Veto guys will be judging for original style points and ingenuity for the best entry. Enter as many times as you like and HO HO HO from Veto and your Mod's.

Got around 33 minutes to go!

[I_bend_metal]

Got around 33 minutes to go!

Can I enter twice???

My G/F submitted an entry for me in the other thread....



Never mind...... I read the directions....

[I_bend_metal]

Here is my nightmare...a 2 ton AC hooked to this 2 ton coil, sitting on a furnace with a 3 ton drive....hacked in 6 years ago.

Instead of a bunch of trips to my van and calling in a salesman, here's what the veto would have done for me....


I would have checked static pressures, tested rise and all the technical things that I can do out of any tool bag....BUT...then I would have pulled my digital camera out of my VETO and snapped a few pictures. Then up loaded them to my laptop. (also pulled out of the VETO) Then I could have done a side by side comparison of what this customer's install looked like compared to a very good and clean install and explained to the customer, just how important a quality install is. After that, we could have walked around her home, while she was showing me the hot and cold spots in her home, I would have been doing a complete load calculation to double check and see if the hacks made a lucky guess or not. After discovering the this furnace was a full 20,000 BTU's too small, I could have gone directly into my sales work. After all was said and done, I could have custom designed a brand new system for this customer and sold it myself, instead of having to wait 2 days for another salesman to get out there. (as we know, days wasted waiting, leave doors open for other companies) This would have benefited my customer, my company and myself and would have saved alot of time, energy and aggravation....

Oh.....and I could have done this without ever having to leave the home to grab something out of my van....