How can anyone walk away from a job like this and feel good about it.some people have no pride in their work
It was like a game to find as many mistakes as i could.
Yes that is a disconnect mounted in between two units with a piece of sheetmetal and one self tapper
20 ft long runs of liquid tite.
3 units only 12" away from each other so i could not service
Changeouts that used existing ductwork that was just pushed way over
Electrical-Emt to liquid tite 90's. Only with no fittings, Just electrical tape
Sweet wood disconnect stands...
Panel with breaker inside with no cover
I can go on forever