Results 1 to 2 of 2

Hybrid View

  1. #1

    Quadrafire 1100i ignitor not getting power

    I have a quadrafire 1100i. It is over 10 years old and I have just recently started experiencing problems with it. When the thermostat kicks in the exhaust fan comes on and pellets begin to feed, however I am getting no power to the ignitor. I hot wired it to make sure the ignitor is not defective and it is working properly. I don't know how to tell if it is a control box issue a
    junction box issue or possible something else. if anyone has experience with this any help would be greatly appreciated.

  2. #2
    Join Date
    May 2005
    Location
    Madison, WI
    Posts
    1,078
    The current Quad units have a fuse for the ignitor. It is one of those round barrel fuses with a black screw cap over it that says "fuse" on it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event