Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2007
    Posts
    89

    Reliable VAV controller and AX

    I had to remove some Reliable VAV controllers, will not go into reasons, but they are Bacnet...Right?
    Can I pull them into a Jace or SoftJace? Do i need special software to set address or do they have a default of device 1 if not already configured, they were stand alone. I would like to play with one in AX to see what I can do with it. Looks like a nice controller BTW.

  2. #2
    Join Date
    Nov 2006
    Location
    New Hampshire
    Posts
    255
    Reliable controllers are software addressed. Meaning you need their Setup tool to address them or use Reliable software in RC-Toolkit called M-Set. Out of the box, though, they come default as MAC address 124.

  3. #3
    Join Date
    Dec 2007
    Posts
    89
    Quote Originally Posted by justjohnson View Post
    Reliable controllers are software addressed. Meaning you need their Setup tool to address them or use Reliable software in RC-Toolkit called M-Set. Out of the box, though, they come default as MAC address 124.
    Thanks, I am going to try to pull one in to a soft jace sometime just to see how they work. These boxes were running stand alone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event