custom control question

[hvt]

I am curious to know if it is possible to place text on the screen in "wiresheet" to indicate, for example, where links are coming from /going to, or more details as to what you have programmed.

[freddy-b]

I am curious to know if it is possible to place text on the screen in "wiresheet" to indicate, for example, where links are coming from /going to, or more details as to what you have programmed.

Rightclick on the wiresheet New and select textblock.

[hvt]

Thanks Freddy, but when I right click, text block does not show up, I am connected to the station at the moment, do you have to be connected directly to the controller to be able to do this? I also cannot get a folder to place on the screen.

[freddy-b]

Thanks Freddy, but when I right click, text block does not show up, I am connected to the station at the moment, do you have to be connected directly to the controller to be able to do this? I also cannot get a folder to place on the screen.

Dont know then? something is hosed with your workbench.

[hvt]

Got it ! I was connected using IE not through workbench, I am new...