The domains are the same however here is the other info
under the device Hardware tab.
Manufacturer: Mitsubishi Electric Corp.
Device Class: SPIDDataFile Error
Device SubClass: Network Management
XIF Present: False
Why error by Device Class?
Is the transceiver correct?
It does look like the transceiver is the problem. My guess is that the NAE is FTTP-10. The baud rate is much higher on the TP/XF-1250. That is generally used for backbones or high speed network channels. Does the NAE have 1250 capability?
I don't think so but Can I change the 1250 in Lonmaker or
Originally Posted by dapper
is the transceiver specified in the .xif file
The transceiver is hardware, normally it can not be field changed. You probably need to get a TP/XF 1250 to FT-10 router.
Originally Posted by mechinc
When you talk, you are only repeating what you already know. But if you listen, you may learn something new. - Dalai Lama
The Mitsubishi board has a FT-10 chip in it.
NAE needs FT-10 communication.
Load the .XIF file and it shows up TP/XF-1250
in the NAE.
Used Echelon tool to look at the .XIF file
and TP/XF-1250 shows up in the .XIF file.
Called Mitsubishi tech support and they claim
they only have one .XIF file for this unit and
it is FT-10 communication.
They sent it to me but still same issue.
Try to get the xif from the device
Originally Posted by poochz
I agree with poochz and outofcontrolman you sould not even attempt an integration without nodeutil. once you understand how it works and you will never understand how you got along without it. Just because somebody from the manufacturer sends you an xif doesn't mean it was the right one, if you generate it yourself then there is no question. Anyway its free!!! and you can show off to your friends look how smart I am works great on the chicks too huh!!!!