Results 1 to 6 of 6
Thread: Oil Skimming
-
10-25-2008, 06:01 AM #1
Professional Member
- Join Date
- Sep 2008
- Location
- Texas
- Posts
- 371
Oil Skimming
I have been asked to install a chiller to cool some process water. The water has oil in it from cooling a weld joint on steel. I was also asked to provide an oil skimmer to clean the oil from the water. Does any one have experience here or know someone who does? I need to provide a magnetic particulate or a floating type skimmer.
Thanks!"Dying aint much, its living thats hard." (Josey Whales)
-
10-25-2008, 10:13 AM #2
Professional Member
- Join Date
- Aug 2000
- Location
- USA
- Posts
- 4,935
Check out here. http://www.mcmaster.com/ Search oil skimmers and magnetic strainers.
Your poor planning does not constitute an emergency on my part!!!!
-
10-25-2008, 09:45 PM #3
Professional Member
- Join Date
- Sep 2008
- Location
- Texas
- Posts
- 371
Thanks Abs
"Dying aint much, its living thats hard." (Josey Whales)
-
10-27-2008, 06:03 PM #4
Professional Member*
- Join Date
- Jul 2006
- Location
- The Great country of Texas
- Posts
- 429
Use your tongue! It was always good for skimming off crap! LOL
Originally Posted by CaptJackSparrow
"I'm from Texas, what country are you from?"
-
10-30-2008, 06:49 AM #5
Professional Member
- Join Date
- Sep 2008
- Location
- Texas
- Posts
- 371
Oh go lube a York! Originally Posted by stickerhead
"Dying aint much, its living thats hard." (Josey Whales)
-
10-31-2008, 12:57 AM #6
Professional Member
- Join Date
- Jan 2003
- Location
- San Jose, Ca
- Posts
- 2,089
You could check into centrifuges. Or lufa sponges.
Old snipes don't die they just loose their steam
Reply With Quote
