Need to know if any one has used the Airstack chiller with the provided fieldserver to Lonworks. I would like to know if it went well and if you had any issues? I am using a Jace BTW. I pulled in the points with a soft jace on my first visit and could read some points. ON the next day all the points were -17. Any one had this issue? I know you must set points up as critical, I did not do this yet, as I was just testing the point data to see if I could see it. Also I converted the XIF to the lnml file extension, but where do I need to load this in the Jace once I get it mounted. Any help?