Controls training

**jdaug1** · 10-24-2008, 09:19 PM

I'm interested in controls training. Any suggestions on a good place to start? Thanks in advance. I'm in MS by the way.

John

**chrisc** · 10-25-2008, 12:50 AM

Apply to JCI and take advantage of their training institute, I've never been disappointed by any of their classes, they've always been top notch.

**lontshooter** · 10-25-2008, 01:14 PM

I would recommend that you start with a small company to get your feet wet and try to attend traing class that the company may be able to get you into, the more personal touch with a comapny that you have the more they will take care of you as an employees, also try your local communinty colleges to see if they offer classes in the controls field. The JR. college around my area have several classes that deal with the construction trade, and a few of them are HVAC controls classes.

Lontshooter

**jdaug1** · 10-25-2008, 01:45 PM

Thanks for the tips guys. Not looking to work with another company, just improve my DDC control knowledge.I've found some decent starting points for others who may be interested here:

http://www2.sea.siemens.com/Products...g/Training.htm

Other training sites recommended would be welcome