Results 1 to 13 of 17
-
08-27-2008, 01:16 PM #1
Regular Guest
- Join Date
- Aug 2008
- Posts
- 8
Everything Honeywell (Some NOT Obsolete)
I have tons of Honeywell Equipment that was used for training purposes.
From complete Delta1000 Systems up to and including XL100B's and BNA's.
Graphic Central/XBSi, R7044's, Gateways, XL500, MacroCel, FS-90, PCSC,
WSE, NexSentry. It's not free, but I can beat anyone's (ISA/JCI/HW) prices.
-
08-27-2008, 03:30 PM #2
Regular Guest
- Join Date
- Jun 2008
- Location
- Orange County, CA
- Posts
- 20
honeywell surplus...
What about Alerton Ibex stuff... I know Honeywell bought them out, and was wondering if you have any VAVi controllers and Microset 1010 thermostats?
-
08-27-2008, 07:11 PM #3
Regular Guest
- Join Date
- Aug 2008
- Posts
- 8
Sorry ...
All the HVAC equip is Honeywell, except for things like RICM boards and the Echelon PCMCIA cards.
-
08-27-2008, 07:14 PM #4
Regular Guest
- Join Date
- Jun 2008
- Location
- Orange County, CA
- Posts
- 20
What about...
Honeywell MP909D series pnuematic actuators, T970A DA thermostats? I am also looking for linkage for the actuators if you have that also.
Matt
-
08-27-2008, 07:34 PM #5
Regular Guest
- Join Date
- Aug 2008
- Posts
- 8
Sorry again ...
Very little of anything pneumatic, mostly automation/controls, like CPA/DPA modules for Delta 1000 would be about it. Union thing back in those days ...
-
09-14-2008, 02:39 PM #6
Professional Member
- Join Date
- Nov 2005
- Posts
- 570
Would you have a spare Delta Net controller?, handheld?
-
09-14-2008, 11:15 PM #7
Regular Guest
- Join Date
- Aug 2008
- Posts
- 8
Hi cyro,
DeltaNet is too generic.
Look for a part number or give me a description.
You are probably talking Excel Plus R7044 and black POT (Portable Op Term)
I have sold a few POT's already, will have to check.
I do have R7044D and E controllers.
Email is in my file ...
-
10-28-2008, 12:59 PM #8
Professional Member
- Join Date
- Jun 2008
- Location
- CA
- Posts
- 46
How about a picture
of a Delta 2000 CPU? I would pay for pictures of the inside and outside of the beast.
DC
-
10-28-2008, 08:00 PM #9
Regular Guest
- Join Date
- Aug 2008
- Posts
- 8
I never thought of that ...
Go ahead and laugh ... I had one.
I think I got $187 for the gold on the edge connectors of the boards and wirewrap pins on the backs of the cardcages. (Didn't have to remove them).
Do still have 3 D1000 CPU's, OPT's, Strip Printers, and Annunciators....
-
10-29-2008, 10:59 AM #10
Professional Member
- Join Date
- Jun 2008
- Location
- CA
- Posts
- 46
I remember doing
Wire wrap OS upgrades to 1's in the field.
I guess 1's have gold on their PCB's as well.
I would still welcome a picture of a 2.
-
10-29-2008, 04:33 PM #11
Regular Guest
- Join Date
- Apr 2004
- Posts
- 566
How much for the pcmcia card?
-
11-10-2008, 01:06 AM #12
New Guest
- Join Date
- Nov 2008
- Posts
- 1
How much for the XL500, BNA's and nexsentry stuff?
How much for the XL500, BNA's and nexsentry stuff?
-
11-19-2008, 12:57 PM #13
New Guest
- Join Date
- Nov 2008
- Posts
- 2
Timeout
Do you olso have a hardlock dongle for the software DeltaNet Excel Plus CAE S/W; this Software for programming DeltaNet Excel Plus Controllers R7044, I already have the software, but I don't have a dongle.
I want to have this only for a hobbyLast edited by Paul1044; 11-19-2008 at 02:41 PM.
Reply With Quote