Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Sep 2006
    Location
    Ohio
    Posts
    473

    W-48 Burnout Block

    I recently changed out a Copeland Discus compressor that was a burnout. I installed a suction line shell with an acid clean-up core and put a W-48 burnout block in the liquid line shell. Did an acid test today and there is no more acid. I'm going to remove the suction line core and leave the shell empty and replace the liquid line block. I have another W-48 block on my truck, so my question is, can I use it and leave it in the liquid line shell, or should I get a standard capacity D-48 block.

  2. #2
    Join Date
    Jun 2006
    Location
    Midwest
    Posts
    284
    standard capacity
    It's All Good!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event