Results 1 to 11 of 11

Thread: 410 A check

  1. #1

    410 A check

    can 410 A be checked by disconecting com from compressor at contactor,
    an running condensor unit,how so. looking to se if refridgerant blend is ok

  2. #2
    Join Date
    Mar 2001
    Location
    North Carolina
    Posts
    428
    HUH

  3. #3
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    Wow I don't get it.

  4. #4
    Join Date
    Jun 2007
    Location
    Round Rock
    Posts
    3,586
    What in the sam hell are you talking about? Maybe doing jumping jacks by the unit will help as well.

  5. #5
    Join Date
    Dec 2007
    Location
    Ohio
    Posts
    2,876
    Pull the dipstick and check that way...
    I need a new signature.....

  6. #6
    Join Date
    Mar 2001
    Location
    North Carolina
    Posts
    428
    Hows about sharing a few of them there beers

  7. #7
    Join Date
    Jul 2008
    Location
    Denver, CO
    Posts
    4,229
    I would just kink the little line and put one hand on each side of the kink, if one gets cold and one gets warm you got yourself a good blend

  8. #8
    Join Date
    Nov 2004
    Location
    Austin, TX
    Posts
    884
    No. There is no easy way to check the blend.
    I am for doing good to the poor, but...I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it. I observed...that the more public provisions were made for the poor, the less they provided for themselves, and of course became poorer. And, on the contrary, the less was done for them, the more they did for themselves, and became richer.
    ― Benjamin Franklin

  9. #9
    Join Date
    Sep 2002
    Location
    Warren, Michigan
    Posts
    84
    Hey guys! Why not just answer his question?


    Answer=No!


    Toddfather
    Never argue with an idiot: They'll drag you down to their level, and beat you with experience!

  10. #10
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,317
    The test he's talking about, would usually be done to check for mixed gasses, and or contaiminates. Works well on R22.

    If your working on a heat pump, you can do it easier then on a straight A/C. Since you have your true suction port.

    You would not pull any wires off.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  11. #11
    Join Date
    Aug 2002
    Location
    Office and warehouse in both Crystal River & New Port Richey ,FL
    Posts
    18,836
    Quote Originally Posted by allan38 View Post
    No. There is no easy way to check the blend.
    Static pressure/temp relationship,will do just fine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event