A little background..I recently got hit by lightning and the display on my signaturestat 51M28 was burned out. The AC was still running as normal, Ac was kicking in as expected per my scheduled programming. I was going to swap it with another signaturestsat but found out these were not being made any more and I could get a ComfortSense 7000 for less than the SigStat cost me orignally. The swap went well, it was a one for one wire swap to the new stat. The Comfort Sense is allowing the my scheduled program to work as expected and it is maintaining the temp.
But...What I am seeing is the AC kicks on for a 10-20 minutes then kicks off for 5, then back on. This cycle is only interupted by hitting a scheduled temperature change in my programming. Is this normal for the ComfortSense or do I possibly have one of the installer settings incorrect.
One more thing to add. Changing the differential settings does not change the endless cycle of on and off. As I would expect it to. Any help would greatly be appreciated.