Ohouse, is ready for install next week! thax everyone
I am schedule to be install next week... very very excited. Hope I made the right decision for the family.
You can see the before photo here:
I went with Trane:
TUH2B080A9V3VA XV95 two stage VS
4TTB3036A1000A XB-13 13 seer (didn't care much about A/C) got two big tree in the yard.
4TXCB036BC3HCA the coil
TCONT802AS32DA the brain TSTAT
btw, in the summer time how do I test the furnace?
Hope the hardware will work together. I'll try to return post during and after photo. And with many other questions... such is the wiring look correct? does this look FAT to you
Good luck to you. Hope all goes well.
Will be waiting for the results.
They will fire off the furnace to check gas pressure, and temp rise.
The house may warm up a bit at first, but A/C can be turned back on after they are done testing.
Let the install begin....we forgot something.
well, they were on-time! But they seem to forgot my 16x25x4 media rack(??) they say they'll build me one... anyway, the photo show when everything is out and the old furnace top view.
Build one??? I guess it can be done, but not sure how well it will support it??
That return going into the wall, it don't look big back in there.. Looks like it only 8 by 8 in back. (is this one of those tri-level home?)
I also noticed the gas line for the water heater, is that going to get changed out? The gas line really should be black pipe.
I couldn't edit the top of this thread so here is a question I posted
http://hvac-talk.com/vbb/showthread.php?p=1951861 if I have enough wire to common and W2.
yes it's a tri-level home. as for black pipe... I don't think the HVAC guys are doing that and nobody mention it either..
Originally Posted by mayguy