Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    Windsor area Ontario Canada
    Posts
    280

    Bradford White HWT Problems

    I was working on a bradford white hot water tank today the M# is MITW40L6BN15
    S#BF6365642

    Tank would ignite and run for 10 to 20 sec and flame would shut off, it would do this over and over without locking out, I replaced the flame sensor/ignitor assembly, still does same problem, pressure switch and vent limit switch both stay closed when flame goes off so it is neither of those, i even ran it without the vent and it did the same thing, i ordered the smart valve that goes on it today because thats what i think the problem was
    smartvalve # is SV9501M5109
    looks like the same one on the older armstrong furnaces (brown smartvalve without the led light) but its slightly different for the hwt
    any help would be appreciated thanks

  2. #2
    Join Date
    Apr 2007
    Posts
    623
    I think you got it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event