Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2008
    Posts
    25

    Freezestat on split systems

    Does anyone have experience with the Honeywell FPC or similar Supco SFPC Freezestats? They just attach to the suction line at the evaporator and open the circuit to the compressor when the line temperature is 35°.
    Are they worth the extra expense?

  2. #2
    Join Date
    Dec 2006
    Location
    Middle Tennessee
    Posts
    11,347

    *

    why do you feel you need a freeze stat?

    if the system is set-up and ran correctly, you should not need a freeze stat!



    .

  3. #3
    Join Date
    Jun 2008
    Posts
    25
    One of my earlier systems had the blower fan go inop and the evap coil froze over. Then, when it melted, it deposited lots of water,- I think causing my furnace to later get rusty, Also, to protect the comp.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event