Oil Furnace Replacement HELP!

[Wayne64SS]

do you think this is the route i should be going? Should i get all futuristic and go with a heat pump? I don't know much about them, or costs for them so more research is required. I just want to be as efficient, and cost effiecient as possible. With the current oil crisis, my oil furnace is just out of the question.

[snupytcb]

i run a pellet stove too, but last year i put a neww boiler in and it was cheaper to run that than the pellets. don't get me wrong i love my stove but pellets are getting pricey. i can guaranty atleast 30% fuel savings if not 50% with an upgrad to your currant boiler. take a look at these biasi b10"s. qhtinc.com.

[Wayne64SS]

the make and model of the furnace i have currently is a CB by BURNHAM

model # CB-3
max output BTU/HR 131.M
net BTU/HR 118.M
max input oil GPH 1.25
maximum wokring pressure turbulators are used 30

hope this helps!

any more suggestions?

[snupytcb]

how about an inside wood boiler? i am selling alot of them lately. everyone is worried about the outdoor boiler ban. they are also on qhtinc.com.

[Wayne64SS]

yea thats what i was looking at. i found a nice harman posted in the link above. i checked around and i can get it local, but the company that sells them says they don't install them yet because they just started to carry them. they said that i would need a contractor.

if you're in my area i'd gladly see what you could quote me.

[snupytcb]

if you want info on this email me or get the phone number off our website. i don't think i can give that info out here. my name is chris.

[beenthere]

if you want info on this email me or get the phone number off our website. i don't think i can give that info out here. my name is chris.

You can put that info in your bio.