Results 1 to 4 of 4
Thread: scotsman cme 456
-
07-15-2008, 08:43 PM #1
Professional Member*
- Join Date
- Dec 2002
- Location
- SouthEast NC ICW & Piedmont Foothills
- Posts
- 7,216
scotsman cme 456
diagnostic lite....refrigeration on solid
reset....freeze drops twice....
third cycle...float drops.....instead of harvest....pump comes back on fills reservoir ...then locks out
105 deg inlet air.......
will long freeze cycle cause solid refr lite lock out....tech support didn't exactly answer the ?????????????
then bin full light came on....only 10" ice in bin
I'm certain I hav e more than one problem.
It`s better to be silent and thought the fool; than speak and remove all doubt. 
-
07-15-2008, 09:10 PM #2
Professional Member*
- Join Date
- Jul 2008
- Location
- Denver, CO
- Posts
- 4,172
Have you checked your bin eyes? when the ice drops you should see the bin light flash
-
07-15-2008, 09:28 PM #3
Professional Member*
- Join Date
- Dec 2002
- Location
- SouthEast NC ICW & Piedmont Foothills
- Posts
- 7,216
bin light was last thing to signal today.
they had a 15 ton unit down.....I decided to get their cooling working and left the ice machine for tomorrow.
I'll pull the eyes when I get back
yesterday it had 2 flash refrigeration code. reset ran 20 hrs. don't know if they had used ice from machine, but there wasn't as much as I thought there should be.
then today run s then solid refrig and later bin full It`s better to be silent and thought the fool; than speak and remove all doubt.
-
07-15-2008, 10:19 PM #4
Regular Guest
- Join Date
- Apr 2007
- Location
- Scottsdale,AZ
- Posts
- 58
long freeze or low discharge temp will cause solid refrigeration diagnostic according to Scotsman
Reply With Quote
