My contractor is not interested. I told him what I wanted. I know trane sells the parts, my dealer told me the XB's do not have covers and that is that. I know that Trane sells them individually for the XR. I just need to buy one, and screw it in, to see if it fits. They are really cheap. (I just need a number to call or website.)
There is no listing on the parts breakdown of the panel you are looking for. Therefore you need on off a XR unit.
IF your model # is something close to 2TTB30 then you need one off a 2TTR30 as they have the same cabinet footprint other than 4 & 5 ton units. Under these unit the panel is not priced, because it is factory order only. You need a dealer that 1)knows it will fit and 2)will.
I had a unit last week that has 49 degrees in the suction line 175 psig and i couldn't drop inside temp below 78 degrees. I check everything i learn in school but was not enought obviously, so if anybody can help with possible solutions will be apreciated.Thanks
I had a unit last week that has 49 degrees in the suction line 175 psig and i couldn't drop inside temp below 78 degrees. I check everything i learn in school but was not enought obviously, so if anybody can help with possible solutions will be apreciated.Thanks
Thread Hijacked....
Start your own. And get your count up to 15. Then apply for Pro.
Can't help you in open forum.
I fully support the military and the War on Terrorism.
If you don't know, then don't do. If you don't know and still do, then be prepared to pay someone else a lot to undo what you did and then do it right.
If you do know, then do. But do it right. Otherwise, you may not be doing it long.
Reply With Quote
Originally Posted by omharacuna
