Page 2 of 2 FirstFirst 12
Results 14 to 20 of 20
  1. #14
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,064
    Trane DOES NOT sell dirsectly to home owners.
    You can purchase the panel through your contractor.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  2. #15
    Join Date
    Jun 2008
    Posts
    34
    My contractor is not interested. I told him what I wanted. I know trane sells the parts, my dealer told me the XB's do not have covers and that is that. I know that Trane sells them individually for the XR. I just need to buy one, and screw it in, to see if it fits. They are really cheap. (I just need a number to call or website.)

  3. #16
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,064
    Trane may sell them. But they DON"T sell them direct to the public/home owner.
    Find another Trane dealer and buy it through them.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  4. #17
    Join Date
    Dec 2007
    Location
    Clearwater, FL
    Posts
    92
    There is no listing on the parts breakdown of the panel you are looking for. Therefore you need on off a XR unit.

    IF your model # is something close to 2TTB30 then you need one off a 2TTR30 as they have the same cabinet footprint other than 4 & 5 ton units. Under these unit the panel is not priced, because it is factory order only. You need a dealer that 1)knows it will fit and 2)will.

  5. #18
    Join Date
    Feb 2008
    Posts
    3

    help a rookie

    I had a unit last week that has 49 degrees in the suction line 175 psig and i couldn't drop inside temp below 78 degrees. I check everything i learn in school but was not enought obviously, so if anybody can help with possible solutions will be apreciated.Thanks

  6. #19
    Join Date
    Feb 2008
    Location
    Western NC
    Posts
    2,504
    Quote Originally Posted by omharacuna View Post
    I had a unit last week that has 49 degrees in the suction line 175 psig and i couldn't drop inside temp below 78 degrees. I check everything i learn in school but was not enought obviously, so if anybody can help with possible solutions will be apreciated.Thanks
    Thread Hijacked....

    Start your own. And get your count up to 15. Then apply for Pro.

    Can't help you in open forum.
    I fully support the military and the War on Terrorism.


    If you don't know, then don't do. If you don't know and still do, then be prepared to pay someone else a lot to undo what you did and then do it right.

    If you do know, then do. But do it right. Otherwise, you may not be doing it long.

  7. #20
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,064
    Quote Originally Posted by omharacuna View Post
    I had a unit last week that has 49 degrees
    Learn to take SH,SC, Wb and DB temps, temp delta across coil also.
    Then when you post a question, we may have an idea of what the system is doing.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event