Results 1 to 3 of 3
Thread: recip to scroll
-
06-28-2008, 04:51 PM #1
New Guest
- Join Date
- Feb 2008
- Location
- Harrisonburg,Virginia
- Posts
- 3
recip to scroll
My York HP compressor just shorted. Has anybody changed out a recip and put scoll in place of it ? I would like to get a little more efficiency. I have space and can adapt for new footprint, but uncertain if the higher volume will affect the reversing valve ?
-
06-28-2008, 05:32 PM #2
Global Moderator
- Join Date
- Jan 2004
- Location
- Lancaster PA
- Posts
- 62,201
In reality, a recip compressor is more efficient then a scroll at capacities under 3.5 ton.
They use the same RV on recips as they do on scrolls.
-
06-30-2008, 09:18 PM #3
New Guest
- Join Date
- Feb 2008
- Location
- Harrisonburg,Virginia
- Posts
- 3
recip to scrolls
Hey,thanks I was not aware of that, I was always informed by vendors that all scroll's could run more efficiently. The scroll worked out perfectly I used the KC for the anti reverse noise that used to be associated with the early scrolls. Thanks for your reply.
BOBCAT
Reply With Quote
