Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jun 2008
    Posts
    48

    Curiosity questions. VS handler

    I just had a variable speed Heat pump installed. It's an Amana unit.

    I know the VS is working because I can feel the difference at the registers. My question is this. I have a standard Honeywell focus 5000 thermostat. How does the system know what speed to run the blower? What signal does it get? Does the Thermostat dictate the speed or does the handler have the controls and how does it know what to do?

    This is purely a curiosity question.

    Clay

    PS. They are installing a new Honeywell IAQ thermostat next week. (cause I want it)

  2. #2
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    67,929
    Your 5000 has no control over the blower.

    They may have set up a slow ramp profile for the VS.
    After that. It only varies its speed to maintain set CFM air flow.

    The IAQ how ever, can slow the blower if the humidity gets high.
    If they have the slow ramp pdofile enabled, they should disable it when they install the IAQ, if you want the IAQ to control the blower for humidity.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event