Results 1 to 7 of 7
  1. #1
    Join Date
    May 2008
    Posts
    45

    Up flow question

    We are having a Lennox system installed this week. We are getting the G61-36B-45 with coil CX34-36B-6F. We are also having two XP13-024-230 heat pumps installed, one to work with the furnace and one with a CBX32-MV-018/024 air handler. My question is this: Since the furnace is multi-positional, can the coil that I listed be positioned on a horizontal furnace or does the furnace have to be installed vertically?

    Thanks!

  2. #2
    Join Date
    May 2007
    Location
    DC Metro Area (MD)
    Posts
    3,371
    Glad you made the decision 1894House. I think you'll be satisfied.

    Lennox specifies this coil as "CX34 Up Flow Full Cased (with TXV) (R-410A)." It may be able to be installed horizontally, but a Lennox dealer will have to confirm this. I know the CH33 coil is horizontal.

    Why no variable-speed blower for the furnace (G61MPV)? If this is on the first floor of the house, it's a good idea. Perhaps you left a number out of the model number because looking back at your previous thread I see you mentioned the G61MPV.

  3. #3
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,058
    I thought all Lennox G61s were VS.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  4. #4
    Join Date
    May 2008
    Posts
    45
    Thanks, Ryan. You are right, we are getting the MPV...variable speed. We have an old house (dirt floor cellar) and are hoping to conserve space for possibly finishing the basement at some point. We were thinking that maybe the furnace could be suspended from the floor joists, but we weren't sure if this coil will work horizontally.

  5. #5
    Join Date
    May 2007
    Location
    DC Metro Area (MD)
    Posts
    3,371
    I would ask your dealer about the feasibility of that idea.

    Been:

    G61 dual stage: http://www.lennox.com/products/overview.asp?model=G61
    G61 dual stage, variable speed: http://www.lennox.com/products/overview.asp?model=G61V

  6. #6
    Join Date
    May 2008
    Posts
    45

    I'll do that...

    thanks again!

  7. #7
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,058
    Thanks. Didn't know it came in 2 different flavors.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event