-
Recommend Your Favorite (The Best) Coil
I asked a similar question in another thread, but the thread topic wasn't right so I had a lot of good responses, just not on the topic I was looking for!
I am replacing my coil. I want the best one possible. I have read about brands (Carrier, Trane, American Standard) and material (Stainless Steel, Copper, Copper+Tin). What is the best coil you have run into? Very open-ended, I know, but we all have different reasons for liking things.
Also what is the best material? Stainless or Copper+Tin (seems Copper alone is problematic)?
TIA.
-Pie
-
I've never seen a stainless steel coil.
-
My favorite would have to be whatever matches the outdoor unit.
How tall are you Private???!!!!
-
-
 Originally Posted by bmathews
I've never seen a stainless steel coil.
Really? So what are they usually made out of?
-Pie
-
 Originally Posted by EatingPie
Really? So what are they usually made out of?
-Pie
alum/copper, straight aluminum.
You can't fix stupid
-
I've only seen s.s. in laboratory equipment. The tin plated copper or all aluminum is supposed to prevent the formicary corrosion problem.
-
My favorite coil is
The easiest one to get out
-
 Originally Posted by EatingPie
I asked a similar question in another thread, but the thread topic wasn't right so I had a lot of good responses, just not on the topic I was looking for!
I am replacing my coil. I want the best one possible. I have read about brands (Carrier, Trane, American Standard) and material (Stainless Steel, Copper, Copper+Tin). What is the best coil you have run into? Very open-ended, I know, but we all have different reasons for liking things.
Also what is the best material? Stainless or Copper+Tin (seems Copper alone is problematic)?
TIA.
-Pie
I would recommend taking a look at the brand YORK I dont know what type of metal is used but the coil is coated with a film.
-
 Originally Posted by ductdoc
I would recommend taking a look at the brand YORK I dont know what type of metal is used but the coil is coated with a film.
I was recommended this in another thread, but I didn't get any good info. Mainly dimensions and installation info.
Do you have a link that describes models and whatnot?
Thanks.
-Pie
-
They all suck, every manufacturer has leaking evap coil issues
-
 Originally Posted by EatingPie
I was recommended this in another thread, but I didn't get any good info. Mainly dimensions and installation info.
Do you have a link that describes models and whatnot?
Thanks.
-Pie
They have a MicroBlue coated fins for better water drainage, I don't know if it prevents formicary corrosion, that is the big problem now. I would like to hear from someone who has been using them. http://www.yorkupg.com/NewCatalog.asp?t=r&id=4
-
No Heat No Cool You need Action Fast
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Related Forums
The place where Electrical professionals meet.
|