Page 1 of 6 123456 LastLast
Results 1 to 13 of 90

Thread: Old Staefa

Hybrid View

  1. #1

    Old Staefa

    Looking for a SM2 Service Tool for an old Smart II board system.Or the program for the laptop version that runs on Windows 95/98.Also any recommendations on replacing the front end for Web Access.

  2. #2
    You can put a Tridium AX or R2 Jace in with a Smart II driver. We do them all the time.

  3. #3
    Join Date
    Jun 2013
    Location
    Dallas, Tx
    Posts
    6
    I know this is a couple of years back but can this still be done in 2013?

  4. #4
    Join Date
    Jun 2013
    Location
    Dallas, Tx
    Posts
    6
    Quote Originally Posted by theintegrator View Post
    You can put a Tridium AX or R2 Jace in with a Smart II driver. We do them all the time.
    I know this is an old post but can it still be done in 2013? We have win98 version and have been using logmein.com to access computer from home which tends to lock up the computer a lot and we end up going to the property to finish making changes.

  5. #5
    Join Date
    Aug 2011
    Location
    Denver PA
    Posts
    37
    Yes it still can be done. We do it all the time.

  6. #6
    Join Date
    Jun 2013
    Location
    Dallas, Tx
    Posts
    6
    Quote Originally Posted by Willys_4 View Post
    Yes it still can be done. We do it all the time.
    I see your in Denver, do you know of a company that can do this in Dallas Tx.

  7. #7
    Join Date
    Apr 2004
    Posts
    181
    Got an Email address?
    The service tools are hard to come by as Siemens does not sell or repair them anymore. But I do have the PC Tool program.

    Zandman

  8. #8
    Join Date
    Mar 2008
    Posts
    86
    Zandman,
    Could you send me a copy too?
    only have one MS1800 site but could come in handy.
    I tried to get a service tool from old customer but was a no go.
    Thanks

  9. #9
    Join Date
    Apr 2009
    Location
    Australia
    Posts
    1

    staefa smart 2 software tool

    Quote Originally Posted by ebusch View Post
    Zandman,
    Could you send me a copy too?
    only have one MS1800 site but could come in handy.
    I tried to get a service tool from old customer but was a no go.
    Thanks

    Could you send me a copy as well?
    I found this thread when searching for it and would highly appreciate it. Thanks very much.
    Last edited by beenthere; 01-21-2010 at 09:57 PM. Reason: Removed email address

  10. #10
    Thanks ,my e-mail is
    Last edited by beenthere; 01-21-2010 at 09:56 PM. Reason: Removed email address

  11. #11
    Join Date
    Mar 2007
    Location
    Australia
    Posts
    24

    PC Tool

    Zandman

    Can you send it to me as well as we will be shortly servicing a staefa I think its MS2000
    Last edited by beenthere; 01-21-2010 at 09:56 PM. Reason: Removed email address

  12. #12
    Join Date
    Mar 2007
    Location
    Australia
    Posts
    24

    tidium AX

    Good to know tidium can support it

    What is the Staefa brick for and does the PC software get around it

  13. #13
    Join Date
    Jun 2005
    Location
    Ohio
    Posts
    1,720
    Along with the PC Tool for your laptop, you'll also need a Comm Port and a Staefa DB9 to RJ connector/cable. We used to get the connectors made at BlackBox for a lot cheaper, but I lost the pinout.
    Also, there's 2 flavors of Staefa DB9/RJ connectors. One is for the SM2 Card, the other is to connect to the NCRS (Node). Neither will work on the other.
    If you can't find the connector, I'll dig thru my books for it.
    jogas

Page 1 of 6 123456 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event