I hope this doesn't sound stupid but I am new to HVAC.
I have a goodman cplt 42 3.5 ton 13 SEER heat pump. I want to take out the fixed orifices and replace them with TXV valves. While installing the TXV on the indoor unit is not a problem, I am having difficulty finding a good place to put he bypass on the outdoor unit. I do not see any schrader valve to hook the bypass to and there is not a lot of room in the tubing to install the supplied stub with the port.
Can I install the equalizer tube after the service port on the condenser unit in to low pressure line since it would be quite easy to cut in there?
Thanks in Advance,