Results 1 to 13 of 30

Threaded View

  1. #1
    Join Date
    Jun 2008
    Post Likes

    Adding TXV to goodman heatpump

    I hope this doesn't sound stupid but I am new to HVAC.

    I have a goodman cplt 42 3.5 ton 13 SEER heat pump. I want to take out the fixed orifices and replace them with TXV valves. While installing the TXV on the indoor unit is not a problem, I am having difficulty finding a good place to put he bypass on the outdoor unit. I do not see any schrader valve to hook the bypass to and there is not a lot of room in the tubing to install the supplied stub with the port.

    Can I install the equalizer tube after the service port on the condenser unit in to low pressure line since it would be quite easy to cut in there?

    Thanks in Advance,

    Last edited by carlb23; 06-22-2008 at 07:18 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.